Premium 13mm ptfe syringe filter for hplc pall
Acrodisc Syringe Filters - pall.co.in
25 mm PSF Acrodisc Syringe Filters. Features a large effective filtration area for increased sample throughput, ideal for sample volumes of ≤ 125 mL. Pall’s proprietary membrane technology and accurate pore size ratings offer superior HPLC column protection, helping extend column life by as much as 52 times. Shop Now 25 mm PSF Syringe Filters.
Pall Acrodisc Syringe Filters online available | analytics
Pall is spezialised in syringe filters offered by Altmann Analytik which are ideal for HPLC and UHPLC automated sample processing and sample clarification. These filters are available in different diameters and membrane materials, called Supor and Acrodisc: Pore Size: 0,1 µm - 10,0 µm Filter Diameter: 4,0 mm - 50,0 mm
Acrodisc PSF Syringe Filters - Pall Corporation
syringe filters are fully compatible with automated workstations to facilitate smooth operation and worry free performance 24 hours a day. HPLC Certified Pall Laboratory certifies Acrodisc PSF syringe filters with PTFE, Nylon, PVDF or wwPTFE membrane to be low in UV absorbing extractables. They have been tested for compatibility
Pall Acrodisc Syringe Filters
Note: Solvent extractable properties of syringe filters equipped with 0.45 μm hydrophilic PTFE membranes (Pall and test). For Panel A, the solvent was methanol and acetonitrile for Panel B. Fifty microliter volumes of filtrate (Pall and test) and solvent blank (Blank) were analyzed using a Waters u Acquity UPLC system with a Diode Array
Acrodisc 13mm Syringe Filter, 0.2µm PTFE Membrane, 1000/PK
Pall 13 mm Acrodisc syringe filters are available with a standard male slip luer outlet or Pall’s proprietary minispike outlet. The minispike allows for easy handling with a HPLC vial, and offers a reduced hold-up volume, ensuring maximum filtrate recovery. Typical hold-up volumes: 13 mm, male slip luer outlet: < 30 μm.
Acrodisc® Syringe Filters with PTFE Membrane - pall.com
Acrodisc Syringe Filters with PTFE Membrane, 13 mm 4552 0.2 µm, minispike outlet 100/pkg 300/cs NA 0 4553 0.45 µm, minispike outlet 100/pkg 300/cs NA 0 4555 0.45 µm, minispike outlet 1000/pkg NA 0 Acrodisc Syringe Filters with PTFE Membrane, 13 mm 4423 0.2 µm, male slip luer outlet 100/pkg 300/cs NA 0 4542 0.2 µm, male slip luer outlet
Acrodisc® Syringe Filters, 13 mm, Pall Laboratory | VWR
These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the
Acrodisc wwPTFE Syringe Filters | Pall- MG Scientific
13mm Acrodisc syringe filter with minispike configuration offers low hold up and easy filtration into autosampler vials Acrodisc® Premium Syringe Filters The Acrodisc Premium Syringe Filters are ideal for automated sampling or sample clarification with a larger EFA than typical 25mm devices.
Syringe Filters | Thermo Fisher Scientific - AU
Titan3 Premium Syringe Filters Target2 Routine Syringe Filters Choice Basic Syringe Filters; Range of filter sizes: 4mm to 30mm: 4mm to 30mm: 13mm to 25mm: High-quality filtration solutions : Low extractable membranes and housing : Plain polypropylene housing : HPLC performance tested : Enhanced Luer Lock inlet which provides secure attachment
Captiva Syringe Filters | Aijiren
All Captiva premium syringe filters are shipped with an HPLC or LC/MS certificate that guarantees low levels of observed extractables Excellent flow rates and maximum sample loading capacities Every syringe filter is constructed with the highest-grade virgin polypropylene or MBS housing
Acrodisc® syringe filters PTFE membrane, diam. 13 mm, pore
Acrodisc® syringe filters PTFE membrane, diam. 13 mm, pore size 0.2 μm; find -Z259861 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
13 Mm Syringe Filter at Thomas Scientific
Red PTFE (Hydrophilic) Syringe Filters, 0.22 µm, 13 mm. Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
13 mm Acrodisc® Syringe Filter with Minispike - Pall Shop
Pall 13 mm Acrodisc syringe filters are available with a standard male slip luer outlet or Pall’s proprietary minispike outlet. The minispike allows for easy handling with a HPLC vial, and offers a reduced hold-up volume, ensuring maximum filtrate recovery. Typical hold-up volumes: 13 mm, male slip luer outlet: < 30 μm.
Pall 6604652 ValuPrep Syringe Filters with wwPTFE Membrane
HPLC Certification Pall Laboratory certifies the following HPLC ValuPrep syringe filters have been tested for compatibility with common HPLC solvents using established HPLC procedures. To verify low levels of UV-detectable extractables, representative samples are tested using a highly sensitive HPLC technique.
Syringe Filters - Pall
For example, Pall supply both a traditional ring molded 25 mm syringe filter and the Premium Syringe Filter (PSF) 25 mm syringe filter. The PSF syringe filter has a much larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2. Therefore, this gives the PSF syringe filter a much improved